| --  作者:阿火 --  发布时间:2011/11/24 9:50:42
 --  “后台下单模板”,可用于各种模型。不会写后台模型的塔友,以后不用写了,复制此模板即OK
 
 为了支持金字塔全速发展,切实解决塔友实际困难 响应金字塔号召 特公布此模板   只要把此模板放在 模型的最后面,就可以后台全自动化交易了。 有个性化需求的,也可在此模板上的基础上定制。   runmode:0;Globalvariable:hold=drawnull;
 ……//这里添加上你自己的模型
 ……//这里添加上你自己的模型 cc800988:=holding;//这句放在信号稳定的地方drawtextex(1,1,800,0,\'虚拟持仓为:\'+numtostr(cc800988,0));//在图表上输入虚拟持仓以便监控
 if not(islastbar) or workmode<>1 then exit;
 xiadan800988:=cc800988-hold;
 if xiadan800988>0.5 then begin
 cang:=min(xiadan800988,abs(hold));
 if hold<0 then begin
 tsellshort(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 平空 %.0f\',cang);
 end
 cang:=xiadan800988+min(hold,0);
 if cang>0 then begin
 tbuy(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 开多 %.0f\',cang);
 end
 end
 if xiadan800988<-0.5 then begin
 cang:=min(abs(xiadan800988),abs(hold));
 if hold>0 then begin
 tsell(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 平多 %.0f\',cang);
 end
 cang:=abs(xiadan800988)-max(hold,0);
 if cang>0 then begin
 tbuyshort(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 开空 %.0f\',cang);
 end
 end
 hold:=cc800988;
         完整实例如下: 实例一、 K线走完模式的模型 Globalvariable:hold=drawnull;cc800988:=holding;//这句放在信号稳定的地方
 //蓝色部分改为你自己的模型(K线走完模型)buycond:=count(c>o,2)=2;
 sellcond:=count(c<o,2)=2;
 if holding>0 and sellcond then sell(1,1,thisclose);
 if holding<0 and buycond then sellshort(1,1,thisclose);
 if holding=0 and buycond then buy(1,1,thisclose);
 if holding=0 and sellcond then buyshort(1,1,thisclose);
   drawtextex(1,1,800,0,\'虚拟持仓为:\'+numtostr(cc800988,0));//在图表上输入虚拟持仓以便监控if not(islastbar) or workmode<>1 then exit;
 xiadan800988:=cc800988-hold;
 if xiadan800988>0.5 then begin
 cang:=min(xiadan800988,abs(hold));
 if hold<0 then begin
 tsellshort(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 平空 %.0f\',cang);
 end
 cang:=xiadan800988+min(hold,0);
 if cang>0 then begin
 tbuy(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 开多 %.0f\',cang);
 end
 end
 if xiadan800988<-0.5 then begin
 cang:=min(abs(xiadan800988),abs(hold));
 if hold>0 then begin
 tsell(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 平多 %.0f\',cang);
 end
 cang:=abs(xiadan800988)-max(hold,0);
 if cang>0 then begin
 tbuyshort(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 开空 %.0f\',cang);
 end
 end
 hold:=cc800988;
 
     实例二、即时下单模型(固定时间间隔) Globalvariable:hold=drawnull; //蓝色部分改为你自己的模型buycond:=h>ref(hhv(h,10),1);
 sellcond:=l<ref(llv(l,10),1);
 if holding>0 and sellcond then sell(1,1,market);
 if holding<0 and buycond then sellshort(1,1,market);
 if holding=0 and buycond then buy(1,1,market);
 if holding=0 and sellcond then buyshort(1,1,market);
 cc800988:=holding;//这句放在信号稳定的地方
 drawtextex(1,1,800,0,\'虚拟持仓为:\'+numtostr(cc800988,0));//在图表上输入虚拟持仓以便监控
 if not(islastbar) or workmode<>1 then exit;
 xiadan800988:=cc800988-hold;
 if xiadan800988>0.5 then begin
 cang:=min(xiadan800988,abs(hold));
 if hold<0 then begin
 tsellshort(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 平空 %.0f\',cang);
 end
 cang:=xiadan800988+min(hold,0);
 if cang>0 then begin
 tbuy(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 开多 %.0f\',cang);
 end
 end
 if xiadan800988<-0.5 then begin
 cang:=min(abs(xiadan800988),abs(hold));
 if hold>0 then begin
 tsell(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 平多 %.0f\',cang);
 end
 cang:=abs(xiadan800988)-max(hold,0);
 if cang>0 then begin
 tbuyshort(1,cang,mkt,0,0,\'800988\'),allowrepeat;
 debugfile(\'D:\\800988.txt\',numtostr(hold,0)+\' \'+numtostr(cc800988,0)+\' 开空 %.0f\',cang);
 end
 end
 hold:=cc800988;
 [此贴子已经被作者于2012-2-16 15:40:21编辑过] 
 |