求助？？？？关于止损问题？？？ - 公式模型编写问题提交 - 金字塔客服中心 - 专业程序化交易软件提供商

B 文件内容

{M 26 5 100 10
K 2 0.4 10 1
SS 1 1 10000 1
}

MID:MA(CLOSE,M);
UPPER:MID+K*STD(CLOSE,M);
LOWER:MID-K*STD(CLOSE,M);

gs 文件内容

ma5:ma(c,5);
ma14:ma(c,14);
ma20:ma(c,20);
jc:cross(ma5,ma20);
sc:cross(ma20,ma5);

公式3 文件内容

runmode:0;
{
mid_15:stkindi('','b.mid',0,3,-1);
upper_15:stkindi('','b.upper',0,3,-1);
lower_15:stkindi('','b.lower',0,3,-1);

mid_15_1:stkindi('','b.mid',0,3,-2);
upper_15_1:stkindi('','b.upper',0,3,-2);
lower_15_1:stkindi('','b.lower',0,3,-2);
sg15:upper_15>upper_15_1;//上轨向上
zg15:mid_15>mid_15_1;//中轨向上
xg15:lower_15<lower_15_1;//下轨向下
zgx15:mid_15>mid_15_1;//中轨向下
}

mid_5:stkindi('','b.mid',0,2,-1);
upper_5:stkindi('','b.upper',0,2,-1);
lower_5:stkindi('','b.lower',0,2,-1);

mid_5_1:stkindi('','b.mid',0,2,-2);
upper_5_1:stkindi('','b.upper',0,2,-2);
lower_5_1:stkindi('','b.lower',0,2,-2);
sg5:upper_5>upper_5_1;//上轨向上
zg5:mid_5>mid_5_1;//中轨向上
xg5:lower_5<lower_5_1;//下轨向下
zgx5:mid_5<mid_5_1;//中轨向下

mid_1:stkindi('','b.mid',0,1,0);
upper_1:stkindi('','b.upper',0,1,0);
lower_1:stkindi('','b.lower',0,1,0);

mid_1_1:stkindi('','b.mid',0,1,-1);
upper_1_1:stkindi('','b.upper',0,1,-1);
lower_1_1:stkindi('','b.lower',0,1,-1);
sg1:upper_1>upper_1_1;//上轨向上
zg1:mid_1>mid_1_1;//中轨向上
xg1：lower_1<lower_1_1;//下轨向下
zgx1:mid_1<mid_1_1;//中轨向下

{macd_15:stkindi('','MACD.macd1',0,3,-1);
ld15:ref(macd_15,1)<macd_15 and macd_15<0；       //绿柱缩短
hc15:0<ref(macd_15,1) and ref(macd_15,1)<macd_15;//红柱申长
lc15:macd_15<ref(macd_15,1) and ref(macd_15,1)<0；//绿柱申长
hd15:0<macd_15 and macd_15<ref(macd_15,1);        //红柱缩短
}
MACD_5:stkindi('','MACD.macd1',0,2,-1);
ld5:ref(macd_5,1)<macd_5 and macd_5<0；      //绿柱缩短
hc5:0<ref(macd_5,1) and ref(macd_5,1)<macd_5;//红柱申长
lc5:macd_5<ref(macd_5,1) and ref(macd_5,1)<0；//绿柱申长
hd5:0<macd_5 and macd_5<ref(macd_5,1);        //红柱缩短

MACD_1:stkindi('','MACD.macd1',0,1,0);
ld:ref(macd_1,1)<macd_1 and macd_1<0; //绿柱缩短
hc:0<ref(macd_1,1) and ref(macd_1,1)<macd_1;//红柱申长
lc:ref(macd_1,1)>macd_1 and ref(macd_1,1)<0;//绿柱申长
hd:0<ref(macd_1,1) and ref(macd_1,1)<macd_1;//红柱缩短

//开多
{tj15:sg15 and zg15 and xg15 and (ld15 or hc15);}
tj5:sg5 and zg5 and xg5 and (ld5 or hc5);
tj1:sg1 and zg1 and xg1 and (ld or hc);

//开空
{tjk15:sg15 and zgx15 and xg15 and (lc15 or hd15);}
tjk5:sg5 and zgx5 and xg5 and (lc5 or hd5);
tjk1:sg1 and zgx1 and xg1 and (lc or hd);

{调用公式}
LINE_1:stkindi('','gs.jc',0,1,0);//1分金叉
LINE_K1:stkindi('','gs.sc',0,1,0);//1分死叉
LINE_5:stkindi('','gs.jc',0,2,-1);//5分金叉
LINE_K5:stkindi('','gs.sc',0,2,-1);//5分死叉

VAR2013:(tj5 AND LINE_5) OR (tj1 AND LINE_1 ) ;//做多

VAR2014:(tjk5 AND LINE_K5 ) OR (tjk1 AND LINE_K1 ) ;//做空

EMA5:EMA(C,5),COLORMAGENTA,LINETHICK1;
DD:=EMA5<REF(EMA5,1);
IF(DD,EMA5,DRAWNULL),COLORBLUE,LINETHICK2;

公式4 文件内容

v_20133_min1:=stkindi('','公式3.var2013',0,1);
v_20144_min1:=stkindi('','公式3.var2014',0,1);
v_20133_min5:=stkindi('','公式3.var2013',0,2);
v_20144_min5:=stkindi('','公式3.var2014',0,2);
v_20133_min15:=stkindi('','公式3.var2013',0,3);
v_20144_min15:=stkindi('','公式3.var2014',0,3);

if v_20133_min1 or v_20133_min5 then tbuy(tbuyholding(0)=0,1,mkt);
if v_20144_min1 or v_20144_min5 then tbuyshort(tsellholding(0)=0,1,mkt);

if dynainfo(7)-tenterprice>1 and tsellholding(0)>0 then tsellshort(1,0,mkt);
if tenterprice-dynainfo(7)>1 and tbuyholding(0)>0 then tsell(1,0,mkt);

if hhv(h,tenterbars+1)-tenterprice>1 and dynainfo(7)-tenterprice<0.2 and tbuyholding(0)>0 then tsell(1,0,mkt);
if tenterprice-llv(l,tenterbars+1)>1 and tenterprice-dynainfo(7)>0.2 and tsellholding(0)>0 then tsellshort(1,0,mkt);

就这么多了。

主题：求助？？？？关于止损问题？？？