标题：交易编写
a1:=(REF(O,1) + REF(C,1)) / 2;
a2:=(H + L + C) / 3;
a3:=MAX(MAX(a1,a2),H);
a4:=MIN(MIN(a1,a2),L);
a5:=IF(a1 < a2,a3 - a4 + a2 - a1,a3 - a4);
a6:=IF(a1 > a2,a3 - a4 + a1 - a2,a3 - a4);
a7:=a5 / (a5 + a6) * AMOUNT * MAX(ABS(a1 - a2) / (a3 - a4),0.15) / 10000;
a8:=a6 / (a5 + a6) * AMOUNT * MAX(ABS(a1 - a2) / (a3 - a4),0.15) / 10000;
a9:=(a7 - a8) * 2.5;
tj1:=a9>0;
pc:=a9<0;
做多力度:=SMA((CLOSE - LLV(LOW,9)) / (HHV(HIGH,9) - LLV(LOW,9)) * 100,5,1) - 8;
做空力度:=SMA((HHV(HIGH,36) - CLOSE) / (HHV(HIGH,36) - LLV(LOW,36)) * 100,2,1);
多空差:=做多力度-做空力度;
tj2:=多空差>0;
aa1:=(C - LLV(L,7)) / (HHV(H,7) - LLV(L,7)) * 100;
aa2:=(C - LLV(L,38)) / (HHV(H,38) - LLV(L,38)) * 100;
小:=SMA(aa2,5,2);
大:=SMA(小,10,1);
tj3:=小>大;
if tj1 and tj2 and tj3 and holding=0 then begin
buy(holding=0,1,marketr);
end
if pc then begin
sell(1,0,marketr);
end
帮忙修改一下 tj2 这个条件只有在第一次满足的时候成交 其他的时候不成交
variable:n=0;
a1:=(REF(O,1) + REF(C,1)) / 2;
a2:=(H + L + C) / 3;
a3:=MAX(MAX(a1,a2),H);
a4:=MIN(MIN(a1,a2),L);
a5:=IF(a1 < a2,a3 - a4 + a2 - a1,a3 - a4);
a6:=IF(a1 > a2,a3 - a4 + a1 - a2,a3 - a4);
a7:=a5 / (a5 + a6) * AMOUNT * MAX(ABS(a1 - a2) / (a3 - a4),0.15) / 10000;
a8:=a6 / (a5 + a6) * AMOUNT * MAX(ABS(a1 - a2) / (a3 - a4),0.15) / 10000;
a9:=(a7 - a8) * 2.5;
tj1:=a9>0;
pc:=a9<0;
做多力度:=SMA((CLOSE - LLV(LOW,9)) / (HHV(HIGH,9) - LLV(LOW,9)) * 100,5,1) - 8;
做空力度:=SMA((HHV(HIGH,36) - CLOSE) / (HHV(HIGH,36) - LLV(LOW,36)) * 100,2,1);
多空差:=做多力度-做空力度;
tj2:=多空差>0;
aa1:=(C - LLV(L,7)) / (HHV(H,7) - LLV(L,7)) * 100;
aa2:=(C - LLV(L,38)) / (HHV(H,38) - LLV(L,38)) * 100;
小:=SMA(aa2,5,2);
大:=SMA(小,10,1);
tj3:=小>大;
if tj2 then n:=n+1;
if tj1 and cross(n=1,0.5) and tj3 and holding=0 then begin
buy(holding=0,1,marketr);
end
if pc then begin
sell(1,0,marketr);
end
if time=closetime(0) then n:=0;
variable:n=0,m=0;
a1:=(REF(O,1) + REF(C,1)) / 2;
a2:=(H + L + C) / 3;
a3:=MAX(MAX(a1,a2),H);
a4:=MIN(MIN(a1,a2),L);
a5:=IF(a1 < a2,a3 - a4 + a2 - a1,a3 - a4);
a6:=IF(a1 > a2,a3 - a4 + a1 - a2,a3 - a4);
a7:=a5 / (a5 + a6) * AMOUNT * MAX(ABS(a1 - a2) / (a3 - a4),0.15) / 10000;
a8:=a6 / (a5 + a6) * AMOUNT * MAX(ABS(a1 - a2) / (a3 - a4),0.15) / 10000;
a9:=(a7 - a8) * 2.5;
tj1:=a9>=0;
pc:=a9<0;
pc1:=a9>0;
tj11:=a9<0;
做多力度:=SMA((CLOSE - LLV(LOW,9)) / (HHV(HIGH,9) - LLV(LOW,9)) * 100,5,1) - 8;
做空力度:=SMA((HHV(HIGH,36) - CLOSE) / (HHV(HIGH,36) - LLV(LOW,36)) * 100,2,1);
多空差:=做多力度-做空力度;
tj2:=多空差>=0;
tj22:=多空差<0;
aa1:=(C - LLV(L,7)) / (HHV(H,7) - LLV(L,7)) * 100;
aa2:=(C - LLV(L,38)) / (HHV(H,38) - LLV(L,38)) * 100;
小:=SMA(aa2,5,2);
大:=SMA(小,10,1);
tj3:=小>大;
tj33:=小<=大;
if tj2 then n:=n+1;
if tj22 then m:=m+1;
if tj1 and cross(n=1,0.5) and tj3 and holding=0 then begin
buy(holding=0,1,marketr);
end
if pc then begin
sell(holding>0,1,marketr);
end
if time=closetime(0) then n:=0;
if tj11 and cross(m=-1,0.5) and tj33 and holding=0 then begin
buyshort(holding=0,1,thisclose);
end
if pc1 then begin
sellshort(holding<0,1,thisclose);
end
if time=closetime(0) then m:=0;
这段代码有两个问题；
1、信号不全，个别符合情况会出现开单信号，多数不开。
2、空单不开。
麻烦改一下。
发个截图说明一下上面所讲的情况
此主题相关图片如下：qq图片20161230085827.png
a2:=(H + L + C) / 3;
a3:=MAX(MAX(a1,a2),H);
a4:=MIN(MIN(a1,a2),L);
a5:=IF(a1 < a2,a3 - a4 + a2 - a1,a3 - a4);
a6:=IF(a1 > a2,a3 - a4 + a1 - a2,a3 - a4);
a7:=a5 / (a5 + a6) * AMOUNT * MAX(ABS(a1 - a2) / (a3 - a4),0.15) / 10000;
a8:=a6 / (a5 + a6) * AMOUNT * MAX(ABS(a1 - a2) / (a3 - a4),0.15) / 10000;
a9:=(a7 - a8) * 2.5;
tj1:=a9>0;
pc:=a9<0;
做多力度:=SMA((CLOSE - LLV(LOW,9)) / (HHV(HIGH,9) - LLV(LOW,9)) * 100,5,1) - 8;
做空力度:=SMA((HHV(HIGH,36) - CLOSE) / (HHV(HIGH,36) - LLV(LOW,36)) * 100,2,1);
多空差:=做多力度-做空力度;
tj2:=cross(多空差,0);
aa1:=(C - LLV(L,7)) / (HHV(H,7) - LLV(L,7)) * 100;
aa2:=(C - LLV(L,38)) / (HHV(H,38) - LLV(L,38)) * 100;
小:=SMA(aa2,5,2);
大:=SMA(小,10,1);
tj3:=小>大;
if tj1 and tj2 and tj3 and holding=0 then begin
buy(holding=0,1,marketr);
end
if pc then begin
sell(1,0,marketr);
end
那你应该讲第一次大于0，不是第一次上穿，
修改的地方加粗变色了
ok
3q