请教

Mr.Virgo

老师帮忙把这个转成图表交易
帐户:'1000';
品种:'BUX09';
//条件判断
Z:=ZIG(3,0.3);
多1:=Z>REF(Z,1) and REF(Z,1)<REF(Z,2) ;
空1:=Z<REF(Z,1) and REF(Z,1)>REF(Z,2) ;
多2:=Z>REF(Z,1) and REF(Z,1)>REF(Z,2) and REF(Z,2)<REF(Z,3);
空2:=Z<REF(Z,1) and REF(Z,1)<REF(Z,2) and REF(Z,2)>REF(Z,3) ;
N11:=BARSLAST(多1);
N12:=BARSLAST(多2);
N21:=BARSLAST(空1);
N22:=BARSLAST(空2);
B11:=REF(C,(N11+1));//多1价
B12:=REF(C,(N12+1));//多2价
B21:=REF(C,(N21+1));//空1价
B22:=REF(C,(N22+1));//空2价
多11:=N11<N21 and (B21-B11)>12*MINDIFF and (DYNAINFO(7)-B11)>0 and (DYNAINFO(7)-B11)<3*MINDIFF;
多12:=N11<N21 and (B22-B12)>12*MINDIFF and (DYNAINFO(7)-B12)>0 and (DYNAINFO(7)-B12)<3*MINDIFF;
空21:=N21<N11 and (B11-B21)>12*MINDIFF and (DYNAINFO(7)-B21)>0 and (DYNAINFO(7)-B21)<3*MINDIFF;
空22:=N21<N11 and (B22-B12)>12*MINDIFF and (DYNAINFO(7)-B22)>0 and (DYNAINFO(7)-B22)<3*MINDIFF;
//多空条件：
多:=多1=1 and 多11=1 or 多2=1 and 多12=1;
空:=空1=1 and 空21=1 or 空2=1 and 空22=1;
VMIN:=090000;//用于隔夜高开或低开时间差
IF (ABS(O-REF(C,1))>=20*MINDIFF AND TIME>090000 AND TIME<090400) THEN VMIN := 093000;
//固定止盈条件判断
固定止盈:DYNAINFO(7)-TAVGENTERPRICEEX2(帐户,品种,0)>=50*MINDIFF;
//固定止损条件判断
固定止损:TAVGENTERPRICEEX2(帐户,品种,0)-DYNAINFO(7)>=20*MINDIFF;
//开多仓条件：
开多:=多 AND THOLDING=0 AND TIME>VMIN AND TIME<145500;
//平多仓条件：
移平多:=IF(THOLDING>0,HHV(HIGH,TTYPEBAR(1,1))-10*MINDIFF,L-10*MINDIFF);
//多单移动止损线
//PARTLINE(THOLDING>0, 移平多, COLORRGB(255,0,0)); 这个在后台不显示
//平多仓
平多仓:=(THOLDING>0 AND 空) OR (THOLDING>0 AND 移平多>C) or (THOLDING>0 AND 固定止盈);
//开空仓条件：
开空:=空 AND THOLDING=0 AND TIME>VMIN AND TIME<145500;
//平空仓条件：
移平空:=IF(THOLDING<0,LLV(LOW,TTYPEBAR(1,3))+10*MINDIFF,H+10*MINDIFF);
//空单移动止损线
//PARTLINE(THOLDING<0,移平空, COLORRGB(0,255,0)); 这个在后台不显示
//平空仓
平空仓:=(THOLDING<0 AND 多) OR (THOLDING<0 AND 移平空<C) or (THOLDING<0 AND 固定止损);

TSELLSHORT(平空仓,THOLDING,LMT,C);//平空仓
TBUY(开多,1,LMT,C);//开多
TSELL(平多仓,THOLDING,LMT,C);//平多仓
TBUYSHORT(开空,1,LMT,C);//开空
//收盘前平仓
TSELL(TIME>145500 AND THOLDING>0,THOLDING,LMT,C-MINDIFF*2);
TSELLSHORT(TIME>145500 AND THOLDING<0,THOLDING,LMT,C+MINDIFF*2);

技术008

Z:=ZIG(3,0.3);
多1:=Z>REF(Z,1) and REF(Z,1)<REF(Z,2) ;
空1:=Z<REF(Z,1) and REF(Z,1)>REF(Z,2) ;
多2:=Z>REF(Z,1) and REF(Z,1)>REF(Z,2) and REF(Z,2)<REF(Z,3);
空2:=Z<REF(Z,1) and REF(Z,1)<REF(Z,2) and REF(Z,2)>REF(Z,3) ;
N11:=BARSLAST(多1);
N12:=BARSLAST(多2);
N21:=BARSLAST(空1);
N22:=BARSLAST(空2);
B11:=REF(C,(N11+1));//多1价
B12:=REF(C,(N12+1));//多2价
B21:=REF(C,(N21+1));//空1价
B22:=REF(C,(N22+1));//空2价
多11:=N11<N21 and (B21-B11)>12*MINDIFF and (close-B11)>0 and (close-B11)<3*MINDIFF;
多12:=N11<N21 and (B22-B12)>12*MINDIFF and (close-B12)>0 and (close-B12)<3*MINDIFF;
空21:=N21<N11 and (B11-B21)>12*MINDIFF and (close-B21)>0 and (close-B21)<3*MINDIFF;
空22:=N21<N11 and (B22-B12)>12*MINDIFF and (close-B22)>0 and (close-B22)<3*MINDIFF;
//多空条件：
多:=多1=1 and 多11=1 or 多2=1 and 多12=1;
空:=空1=1 and 空21=1 or 空2=1 and 空22=1;
VMIN:=090000;//用于隔夜高开或低开时间差
IF (ABS(O-REF(C,1))>=20*MINDIFF AND TIME>090000 AND TIME<090400) THEN VMIN := 093000;
//固定止盈条件判断
固定止盈:close-AVGENTERPRICE>=50*MINDIFF;
//固定止损条件判断
固定止损:AVGENTERPRICE-close>=20*MINDIFF;
//开多仓条件：
开多:=多 AND holding=0 AND TIME>VMIN AND TIME<145500;
//平多仓条件：
移平多:=IF(holding>0,HHV(HIGH,TYPEBAR(1,1))-10*MINDIFF,L-10*MINDIFF);
//多单移动止损线
//PARTLINE(holding>0, 移平多, COLORRGB(255,0,0)); 这个在后台不显示
//平多仓
平多仓:=(holding>0 AND 空) OR (holding>0 AND 移平多>C) or (holding>0 AND 固定止盈);
//开空仓条件：
开空:=空 AND holding=0 AND TIME>VMIN AND TIME<145500;
//平空仓条件：
移平空:=IF(holding<0,LLV(LOW,TYPEBAR(1,3))+10*MINDIFF,H+10*MINDIFF);
//空单移动止损线
//PARTLINE(holding<0,移平空, COLORRGB(0,255,0)); 这个在后台不显示
//平空仓
平空仓:=(holding<0 AND 多) OR (holding<0 AND 移平空<C) or (holding<0 AND 固定止损);

SELLSHORT(平空仓,holding,limitr,C);//平空仓
BUY(开多,1,limitr,C);//开多
SELL(平多仓,holding,limitr,C);//平多仓
BUYSHORT(开空,1,limitr,C);//开空
//收盘前平仓
SELL(TIME>145500 AND holding>0,holding,limitr,C-MINDIFF*2);
SELLSHORT(TIME>145500 AND holding<0,holding,limitr,C+MINDIFF*2);

Mr.Virgo

谢谢，老师，手数是调整哪个？

Mr.Virgo

老师，请问一下，哪里问题，开平仓时间，全部是在13-14点，没有别的时间段。

Mr.Virgo

技术008 发表于 2022-7-3 21:52
Z:=ZIG(3,0.3);
多1:=Z>REF(Z,1) and REF(Z,1)REF(Z,1) and REF(Z,1)>REF(Z,2) and REF(Z,2)090000 AND  ...

老师，夜盘再帮加一个夜盘平仓，请问控制开的手数改哪个？

技术006

BUY(开多,1,limitr,C);//开多
BUYSHORT(开空,1,limitr,C);//开空

红色部分就是开仓的手数。


运行在什么周期下

Mr.Virgo

技术006 发表于 2022-7-24 21:00
BUY(开多,1,limitr,C);//开多
BUYSHORT(开空,1,limitr,C);//开空

运行在30秒周期；
这个信号漂移严重，是个亏货指标

技术009

if  time=CLOSETIME(1) then
begin
收盘平多:sell(1,0,market);
收盘平空:sellshort(1,0,market);       
end

Mr.Virgo

技术009 发表于 2022-7-25 09:38
if  time=CLOSETIME(1) then
begin
收盘平多:sell(1,0,market);

收到，谢谢老师